SANIGRIND
NEW
Product – now available for distribution
The
Sanigrind is a grinder unit only and is designed to work with a standard
bottom outlet toilet. The
beauty of the Sanigrind is the opportunity for
the contractor or homeowner to select any model or color of toilet they
wish. The Sanigrind is based on the best selling Sanibest unit and it will
also
dispose of waste water from a handbasin, bathtub and a laundry washer as
well.*
The
Sanigrind unit discharges the effluent through a 3/4-inch diameter pipe into
a sanitary gravity drain. Effluent can be pumped 18 feet or hoizontally
to 150 feet, or a combination of both. The unit is installed on the floor,
while the toilet, bath or shower, and handbasin are situated on a raised
platform.
The
Sanigrind should be connected to a ground fault circuit interrupter (GFCI)
circuit only. The supply is 120V, 15A single phase. A micro-switch in the
pressure chamber is activated by the level of water in the unit arising from
the discharge
of the sanitary appliance. It will operate when the toilet is flushed. Simple
valves on each of the side inlets close momentarily until the toilet waste
is reduced and pumped away. A non-return valve prevents back flow into the
unit.
The
Sanigrind must only be used for human waste and toilet tissue. It is however
designed to grind up other items that may accidentally be flushed
down the
toilet such as strands of wool, sanitary napkins, condoms, but not dental
floss, cat litter or disposable diapers, nor is the Sanigrind to be used
as a pump
for the kitchen sink.
*
Laundry washer must drain into a laundry tub first prior to the Sanigrind.
